 |
|||
| A | 81-916 | 40 Gallon Fuel Tank, fits 1998+ Workhorse Chassis, Dim:28-1/4x34-3/4x12 1/2".
For gas engines use fuel pump 81-811; for diesel engines use fuel pump 81-813. Fits straps 81935. |
$285.80 |
| A1 | 81-811 | Fuel Pump and Sending Unit Assembly, 1998-on Workhorse Chassis, 350 c.i.Gas Engines. Mounts with snap ring. Filler extends to side. (Many times the original wire harness will be defective. We suggest you order 81-824 when ordering this unit.) |
$ 25.00 |
| A2 | 81-824 | Wiring Harness for 81-811 sending unit. When replacing 81-811 sending unit we recommend replacing this wire harness also. |
$25.20 |
| A3 | 81-813 | Sending Unit Assembly, 1998-on Workhorse Chassis, 6.5 Liter Diesel Engine |
|
| B | 81-906 | 40 Gal. Fuel Tank, 87-97 P-Chassis with fuel injection. Dim: 28-1/4” x 34-3/4” x 12-1/2” Filler located in corner of tank. Uses straps 81935. |
$272.63 |
| B1 | 81-960 | Sending Unit for throttle body 350 gas engine,87-95. Order fuel pump 81-810 (not included with sending unit). Order strainer (fuel sock) 81-899 for pump 81-810. |
$390.00 |
| B2 | 81-810 | Fuel Pump for 81-980 sending unit. Fits years 87-95. Used with throttle body injection. Order strainer 81-899 (not included) |
$ 63.14 |
| B3 | 81-899 | Strainer (fuel sock) for 81-810 fuel pump. |
|
| C1 | 81-985 | Sending Unit for multi-port fuel injection 350 gas engine. Fits years 96-97. Order fuel pump 81-808 (not included). Order strainer (fuel sock) 81-897 for pump 81-808 (not included) |
$390.00 |
| C2 | 81-808 | Fuel Pump for multi-port fuel injection 350 and 454 c.i. gas engine. Fits years 96-97. Used with sending unit 81-985. Order strainer (fuel sock) 81-987 (not included). |
$126.08 |
| C3 | 81-987 | Strainer (fuel sock) for 81-808 fuel pump. Not included with fuel pump. |
|
| D | 81-908 | 40 Gal. Fuel Tank, 82-86 w/350 carb. engine; 82-97 6.2 & 6.5L diesel engine w/pump on engine & inline pump. Dim: 28-1/4” x 34-3/4” x 12-1/2”. Large filler located in corner of tank. Use 81-975 sending unit for carb. engine; use 81-950 sending unit for Fits straps 81935. |
|
| D | 81-910 | 40 Gal. Fuel Tank, Fits 1981 P-Chassis with pump on engine. Dim: 28-1/4” x 34-3/4” x 12-1/2” Small (1-1/4") filler located in corner of tank. Uses straps 81-935. |
$223.58 |
| D1 | 81-975 | Sending Unit fits 5.7 carbureted engine, 1981-86 P-Chassis. |
|
| D2 | 81-950 | Sending Unit for 6.2 and 6.5 Liter Diesel engine, 82-97 P-Chassis. |
|
| E | 81-912 | 30 Gal. Fuel Tank, 80-81 P-Chassis, Dim: 28-1/2” x 29” x 13”. 90 degree filler pipe on top 10" from front. Check location of filler tube on 1981 trucks. Use with 81-955 sending unit. Fits 81-926 straps. |
$150.95 |
| E1 | 81-975 | Sending Unit for 81-912 tank |
|
| F | 81-914 | 30 Gal. Fuel Tank, Fits 73-79 P-Chassis. DimL: 45-1/2” x 19-1/4” x 11-1/4”. Alter straps to fit 81-988 sending unit. If replacing a 1973-75 tank you must order a new sending unit (81-988). The old sending unit will not fit the new tank. Straps 81-926 work with slight alteration. |
|
| F1 | 81-990 | Sending Unit for 81-914 tank. Includes rubber hose cap for extra line not needed |
|
| J | 81-926 | Fuel Tank Strap (one pair) for 81-912 and 81-914. Alter straps with tank 81-914. |
|
| K | 81-935 | Fuel Tank straps (one pair). Fits tanks 81-906, 81-908, 81-910 and 81-916. |
|
| L | 81-960 | Rubber Insulation for gas tank straps, 10 ft length |
|
| Customer Service | ||
Information Pages: |
||
| This Month's Specials | ||
| Brand Names: | ||
| Kason Hardware | ||
| Todco Roll-up Doors | ||
| Whiting Roll-up Doors | ||
| Truck Lite | ||
| Velvac Mirrors® | ||
| Parts Pages: | ||
| Audio Systems | ||
| Back Alarms | ||
| Brakes | ||
| Bumpers | ||
| Chassis - Driveline | ||
| Cooling | ||
| Door Hardware | ||
| Engines | ||
| Exhaust Systems | ||
| Front End Parts | ||
| Gas Tanks | ||
| Heater Parts | ||
| Liftgate | ||
| Lighting | ||
| Mirrors | ||
| New Products | ||
| Seats | ||
| Wiper Parts | ||
| Information: | ||
| Customer Vans | ||
| FAX Order Form | ||
| Wheel Simulator Order Form | ||
| Material Safety Data Sheets | ||
| Ordering Instructions | ||
| Product Index | ||
 |
|||
| A | 91-75-110 | 22 Gal, Fuel Tank, 75-85 E-350, rear mount with small 2" sender gauge hole, vent pipe toward front |
|
| A1 | 81-969 | Fuel Sending Unit only, 75-85 E-Series vans with gas and diesel engines |
|
| B | 91-86-113 | 22 Gal, Fuel Tank, 86-87 E-350, rear mount with large 3 5/8" sender gauge hole |
|
| C | 91-88-115 | 22 Gal, Fuel Tank, 88-91 E-350, rear mount with large 3 5/8" sender gauge hole |
|
| D | 81-970 | Fuel Sending Unit only, 1986-91 E-Series, requires harness plug 43-542 (picture E) |
|
| E | 43-542 | Repair Harness Plug for 81-970 Sending Unit, used with 81-970 sending unit |
|
| F | 91-75-112 | Upper Fuel Tank Strap, Pair |
|
| G | 81-940 | Lower Fuel Tank Strap, Pair |
|
| H | 81-960 | Rubber insulation for gas tank straps, 10 ft length |
|
| I | 81-996 | Fuel Line Repair Kit, 3/8" x 30" |
|
| I | 81-997 | Fuel Line Repair Kit, 5/16" x 30" |
|
|
|||
